PUBLICATION COVERAGE
Browse 102 BLISS Lab publications. Search by title, author or DOI, or choose a research theme.
Download the catalogue: CSV · JSON — titles, DOIs, summaries and reading scope
102 papers
Advanced Science, e78062 (2026), Early View
PVA-modified liquid-metal particle ink that conducts as sprayed, giving 1.5 × 10^6 S m−1 without post-treatment and continuity beyond 200% strain.
Materials Science and Engineering R: Reports, 171, 101285 (2026)
Review of packaging rigid IC chips into soft electronics across three architectures and three interface requirements; sub-100 μm fine pitch is the key barrier.
Small Science, 6(9), e70402 (2026)
Review of wearable thermoelectric devices that links skin contact, stretchable design and heat-flow paths to performance; Table 4 spans up to 25.34 μW cm−2 K−2.
Burns & Trauma, 14, tkag055 (2026)
A review of bioadhesive hydrogels as immunomodulatory interfaces for chronic wounds, grouped into protective, bioactive, stimuli-responsive and sensing designs.
Advanced Materials, e74385 (2026)
A moldable PVA/gelatin/nanocellulose hydro-dough stopped calvarial sinus bleeding within 50 s and, with bone fragments, reached 34.80% BV/TV at 8 weeks.
Advanced Functional Materials, 36(67), e77191 (2026)
An oxygen-releasing, hMSC-laden bioink printed into diabetic mouse wounds by a vision-guided robot accelerated wound closure relative to Tegaderm.
Materials Today Bio, 39, 103405 (2026)
FLUID maintains a lubricated interface using silicone oil stored in a porous ureteral-stent wall. Initial bacterial adhesion fell by over 94% at 72 hours, while bacterial recovery in a 14-day mature-biofilm model fell by about 21% or 28%, depending on the comparator stent.
Materials Today Bio, 38, 103299 (2026)
Review of piezoelectric antibacterial platforms driven by multiple energy inputs and AI, covering mechanisms, material design, applications and reporting gaps.
ACS Applied Materials & Interfaces, 18(25), 34821-34834 (2026)
A single-use endoscope cap with a PDMS brush and silicone oil interface; one sponge refresh restored visual clarity from 84.3 ± 4.8% to 98.9 ± 1.2%.
Nature Communications, 17, 5526 (2026)
STAT, a quinone-mediated double-network hydrogel, bonded to wet porcine skin at 273 kPa lap-shear strength and stopped mouse liver bleeding within 10 s.
Bioactive Materials, 61, 210 - 228 (2026)
ELFS, a polydopamine-anchored lubricant-infused stent coating, kept rabbit bile duct stents open for 2 months while uncoated stents became fully occluded.
Advanced Materials, 38(19), e15767 (2026)
Sulfate and calcium treatment order tuned PVA–alginate hydrogel pores from 65 nm to 2.5 µm, setting glucose sensor ranges for sweat and interstitial fluid.
Small, 22(17), e10949 (2026)
MOLE combines bonded silicone–Parylene C layers with a lubricated surface. Insulation was tested by accelerated aging at 85 °C, and device degradation and tissue responses by 7-day subcutaneous implantation in mice; these results do not establish a long-term human implant lifetime.
Advanced Healthcare Materials, 15(12), e04939 (2026)
A spray-printed PVA/liquid-metal patch delivered screened stimulation to diabetic mouse wounds, leaving 23.4% wound area at day 3 versus 66.8% untreated.
ACS Environmental Au, 6(1), 125-133 (2026)
A graphene oxide and perfluoropolyether coating on PVDF kept salt rejection above 99.7% at 15.4 LMH flux for 24 h of distillation with 0.4 mM surfactant.
ACS Applied Materials & Interfaces, 17(51), 70047 - 70058 (2025)
Nitinol–PMMA composite in which induction heating drives shape recovery and CO2 foaming; foaming raised impact strength by 142% and tuned model drug release.
Advanced Electronic Materials, 11(19), e00475 (2025)
Review of OLED encapsulation from glass lids to thin-film hybrid multilayers, linking WVTR targets near 10−6 g m−2 day−1 to flexible and bioelectronic devices.
Science Advances, 11(37), eadz1228 (2025)
TAB combines a lubricated interface with immobilized BDNF to reduce nonspecific attachment and support neuronal interactions. Representative single-unit recordings in mice extend to 12 months; electrode-level statistical comparisons cover a separate 8-month period.
Small, 21(34), 2501590 (2025)
PFPE sealing of a nanoribbon-rigidified ZIF-8 membrane gave ideal H2/N2 selectivity of 209; added plasma fluorination raised ideal H2/CH4 selectivity to 1218.
Advanced Materials Interfaces, 12(14), e00353 (2025)
A 10 s two-step perfluoropolyether dip coating gave 12 materials a ~110° contact angle, cut friction from 0.22 to 0.08 and reduced B. cereus attachment by 91.2%.
Advanced Healthcare Materials, 14(1), 2401735 (2025)
A vision-guided 6-axis robot printer made wound-matched wireless stimulation patches; in vitro, stimulation sped fibroblast and endothelial cell migration.
Small, 20(43), 2402431 (2024)
A lubricant-coated PDMS organ chip recovered 94.9% of dopamine and 98.6% of levodopa in cell-free tests, versus 83.2% and 89.6% in a conventional PDMS chip.
npj Flexible Electronics, 8, 39 (2024)
d-HAPT joins dissimilar electronic materials through moisture-induced chain entanglement in dried PVA–tannic acid layers. Dry–dry bonding uses interfacial water and heat; wet–dry bonding uses hydrogel moisture. Wet–wet and dry-material–tissue adhesion remain limited.
Advanced Materials Technologies, 9(10), 2400157 (2024)
A salting-out hydrogel ink kept gelation below room temperature for direct ink writing, yielding printed hydrogels with Young's moduli of 0.193–1.072 MPa.
ACS Nano, 18(19), 12210-12224 (2024)
A wireless, chip-less strain-sensing suture followed a reconstructed porcine Achilles tendon for 10 weeks; strain fell to 5.83% (normal tendon: 4.38%).
Biosensors & Bioelectronics, 255, 116257 (2024)
Nanoclay and carbon nanotube fillers set a 3D-printable hydrogel ink to 10–300 kPa modulus and about 20 S/m conductivity for a ring-shaped finger sensor.
Advanced Electronic Materials, 10(8), 2400013 (2024)
A self-healing, adhesive hydrogel-Ecoflex triboelectric nanogenerator gave about 180 V and 0.8 μA, and a power management circuit charged capacitors to 5 V.
Advanced Materials Technologies, 9(11), 2400060 (2024)
A robot-mounted depth camera guides in situ printing of multiple inks into wounds; spray mode covered a 10 cm × 10 cm area 12 times faster than extrusion.
Industrial Chemistry & Materials, 2(3), 361-377 (2024)
A review of liquid-based conductors, liquid-infused encapsulation and liquid-based adhesives for bioelectronics, with the reported limits of each material type.
Chemical Engineering Journal, 482, 149043 (2024)
Titanium coating pairing immobilized BMP-2 with a lubricant layer; in rabbit femurs it resisted MRSA and gave ~45 N nail pull-out force versus ~5 N for LOIS.
Advanced Functional Materials, 34(14), 2312740 (2024)
A lubricant-infused V4D4/fluoropolymer coating stayed crack-free after 2000 cycles at 150% strain and reduced foreign body reaction around hydrogels in mice.
Advanced Functional Materials, 34(31), 2311696 (2024)
Stretchable liquid-metal electrodes coated with rGO-wrapped EGaIn particles resolved ascorbic acid, dopamine and uric acid peaks after 200 cycles of 30% strain.
Advanced Science, 10(30), 2303651 (2023)
A tannic acid double-network hydrogel patch that self-heals, resists swelling and bonds to porcine skin (≈35.98 kPa); it stopped mouse liver bleeding in 10 s.
International Journal of Bioprinting, 9(5), 765 (2023)
A 3D-printable PVA/tannic acid/PAA hydrogel ink printed at about 100 μm resolution; with 6 mg/mL CNT it reached ~0.95 S/m and regained conduction after cutting.
ACS Nano, 17(8), 7296–7310 (2023)
Self-healing polymer vascular graft with a lubricant-swollen lumen and built-in CNT pressure sensor; it resealed 25G needle holes and sensed flow to 100 mL/min.
Bioactive Materials, 25, 555-568 (2023)
Polydopamine-anchored, lubricant-swollen fluoropolymer coating for complex devices; with it, 34 G bioprinting nozzles avoided the drop to 72 ± 5.15% viability.
Advanced Science, 10(12), 2207237 (2023)
A PVA/PAA hydrogel with tannic acid and carbon nanotube nanoconfinement resisted swelling, self-healed within 5 min, conducted ≈40 S m−1 and was 3D printable.
Biosensors, 13(1), 83 (2023)
A review classifying microfluidic impedance biosensors into six substrate types and contrasting flow cytometry of moving cells with impedance spectroscopy.
2022 IEEE International Ultrasonics Symposium (IUS), 1 - 4 (2022)
A capacitive micromachined ultrasonic transducer with nano-silicon springs beneath its plate gave a calculated surface pressure of 1.1 MPa at 5 VPP (220 kPa/V).
ACS Applied Electronic Materials, 4(4), 1449-1468 (2022)
A review of materials that keep wearable and implantable bioelectronics working long term, organized by physical, biological and interfacial compatibility.
Small, 18(14), 2107060 (2022)
A liquid-permeable Fabry–Perot resonator turned voltage-driven water entry across about 10-nm gaps into a color change, shifting resonance by 87 nm in 0.6 s.
Biotechnology Journal, 16(12), 2100231 (2021)
A review of bioadhesives that add antimicrobial, cell-infiltrative, conductive, self-healing or stimuli-responsive functions for tissue healing and sensing.
Nanoscale, 13(43), 18112-18124 (2021)
A core-shell electronic suture senses its own strain (gauge factor ~686) and releases drug from a heat-responsive shell, tested in cells and excised pig skin.
Advanced Science, 8(15), 2100231 (2021)
A lubricated, anti-biofouling coating on silicon neural probes cut insertion impulse by 86% and extended neural recording in mice from 8 to 16 weeks.
Advanced Materials, 33(47), 2005930 (2021)
A review of electronic drugs grouped by site and duration of action: ingestible and patch devices, bioresorbable implants and long-term implants.
Science Advances, 6 (44), eabb0025 (2020)
A lubricant-infused stainless-steel implant coating prevented infection in all six rabbits given MRSA-preincubated fixation implants, versus six of six bare.
Scientific Reports, 10, 17454 (2020)
Femtosecond-laser nanostructures engraved into an endoscope lens and filled with lubricant kept over 80% of the view clear after repeated dipping in blood.
Biochip Journal, 14(1), 48-62 (2020)
A review of strategies against the foreign body response to implants: soft and flexible materials, biocompatible coatings, drug delivery and slippery surfaces.
ACS Applied Materials & Interfaces, 11(23), 20615-20627 (2019)
Crosslinking hyaluronic acid in carbon nanotube microfibers limited creep and enzyme degradation; a braided six-fiber bundle gave a stable 0.05% strain in DPBS.
ChemNanoMat, 5(6), 729-737 (2019)
PEDOT polymerized inside rubbery electrospun fiber mats gave about 5 S/cm, resistance that tracked stretching and finger bending, and cardiac cell support.
Advanced Healthcare Materials, 8 (3), 1801146 (2019)
A pneumatic chip applied 1 Hz cyclic compression (0–20%) to cardiac fibroblasts in GelMA; 15–20% strain promoted myofibroblast activation, 5–10% did not.
ACS Applied Materials & Interfaces, 11 (5), 5484-5491 (2019)
Mushroom-shaped PDMS micropillars whose cap edges curl down after 50 nm Al deposition repel liquids down to 14.8 mN/m without any fluorinated coating.
Current Pharmaceutical Design, 24 (45), 5458-5470 (2018)
Review of biomaterial microarray platforms that screen cell responses to chemical and physical cues in 2D and 3D, and biosensors for organ-on-chip monitoring.
ACS Applied Nano Materials, 1(12), 6630-6640, (2018)
i-motif DNA cross-links dsDNA-wrapped carbon nanotubes into wet-spun microfibers with ∼27 S/cm conductivity, pH-switchable porosity and H2O2-responsive redox.
ACS Applied Materials & Interfaces, 10 (42), 36094-36101 (2018)
A Kevlar fiber coated with a silver nanoparticle-SBS composite and a fluorinated monolayer kept 0.11-0.28 Ω/cm after 20 washes and repelled water and stains.
Sensors & Actuators B: Chemical, 267, 237-244 (2018)
An extended-gate FET carrying full-length histone H3 detected cathepsin L activity by substrate cleavage, reaching 1 ng/mL compared with 10 μg/mL for fluorometry.
ACS Nano, 12(5), 4259-4268 (2018)
Ag nanoparticles grown inside a multifilament elastic fiber gave a strain sensor with a gauge factor of about 9.3 × 10^5 and a 450% sensing range on first stretch.
ACS Applied Materials & Interfaces, 10 (16), 13293-13303 (2018)
Stackable gas-driven bioreactors applied 0–42% cyclic compression to stem cells in 3D GelMA; 42% strain in 5% GelMA raised Runx2, ALP and calcium deposition.
Advanced Materials, 30 (10), 1704189 (2018)
A stingray-like soft actuator with cardiomyocytes on patterned CNT–GelMA and PEG hydrogels and embedded Au microelectrodes was locally paced at 0.5 and 1.0 Hz.
ACS Nano, 12 (2), 932-941 (2018)
A vacuum tip beneath stretchable superamphiphobic PDMS moved droplets and left 0.05–1.4 μL aliquots on wettable spots for glucose, uric acid and lactate assays.
Coatings, 8 (2), 47 (2018)
Review of pattern transfer, nanoparticle assembly and thiol-ene routes to flexible, transparent superamphiphobic surfaces, with wetting and optical data.
Biomaterials, 153, 85-101 (2018)
Review of high-throughput platforms that screen cell responses to biomaterials and delivered molecules in 2D and 3D and analyze genes, glycans and proteins.
Journal of Semiconductors, 39 (1), 011009 (2018)
Review of hybrid microfibers with carbon and metal nanomaterials and hydrogels for textile electronics, pressure sensors, biosensors and tissue engineering.
Nanoscale, 9(47), 18737-18752 (2017)
Titanium-coated nanogratings with pulsed stimulation raised MAP2-positive cells from human neural stem cells to 56.2% in 5 days, versus 24.6% on bare flat PUA.
Materials Science and Engineering R: Reports, 119, 1-35 (2017)
Review of tissue engineering hydrogels controlled in space and time, from micropatterning and 3D bioprinting to timed release, stiffening and degradation.
Nano Today, 15, 91-106 (2017)
Review tracing inorganic, polymeric and lipid-based drug delivery nanomaterials to FDA approval, noting over 200 nanomaterial products then in clinical studies.
Advanced Functional Materials, 27 (29), 1701618 (2017)
Slanted polymer nanofibers coated with palladium on one side straightened in 4 vol% hydrogen, raising light transmittance by about 65% with a 5.1 s response.
Biomicrofluidics, 11 (4), 044109 (2017)
A bioprinted GelMA liver model with an endothelial-lined channel delayed dye diffusion and lessened acetaminophen-induced loss of HepG2/C3A metabolic activity.
Small, 13 (7), 1602865 (2017)
A superhydrophobic silver-dendrite track with a droplet stopper moved 1 µL droplets to a Raman spot for successive SERS reads; enhancement factor 6.3 × 10⁵.
Advanced Materials, 28 (34), 7365-7374 (2016)
A triboelectric stimulator raised nonviral conversion of mouse fibroblasts into neuronal cells from 6.41% to 14.17% and in skin from 0.04% to 5.86%.
ACS Applied Materials & Interfaces, 8 (28), 17763-17774 (2016)
Graphene oxide substrates with 5 μm grooves, ridges and nanoroughness increased neuronal differentiation of human neural stem cells without neurogenic factors.
NPG Asia Materials, 8(4), e262 (2016)
Palladium nanoparticles grown by a galvanic displacement reaction decorated defects in CVD graphene, lowering sheet resistance from about 1 kΩ/sq to 173 Ω/sq.
Materials, 9(2), 116 (2016)
A review of bio-inspired extreme wetting surfaces, from lotus-type to slippery designs, and their use in cell patterning, spheroid culture, devices and assays.
Journal of Nanomaterials, 2015(1), 975043 (2015)
Few-layer graphene grown on silver nanoparticles from PMMA blocked oxidation in air; a dye Raman peak went from 36,304 to 24,436, versus 113 on bare silver.
Journal of Materials Chemistry C, 3(39), 10293-10301 (2015)
An atomic-layer-deposited SiO2 interlayer under Ta1−xZrxO on InP cut capacitance dispersion from 21.1% to 11.3% and lowered leakage in MOS capacitors.
Nanomaterials, 5(3), 1493-1531 (2015)
Review of conductive textiles, fiber transistors, LEDs and pressure sensors, and textile energy harvesters and storage, with reported outputs and open problems.
Applied Surface Science, 344, 52-56 (2015)
Graphene transistors under 5, 10 and 15 MeV protons showed vacancy defects at 5 and 10 MeV but mainly sp3-type Raman signals and a flat Dirac region at 15 MeV.
Chemistry of Materials, 27 (14), 4964-4971 (2015)
Hydrogen-induced expansion of Pd on Ag dendrites switched superamphiphobic adhesion reversibly; a 7 μL hexadecane drop held upside down with 31.8 μN in 8% H2.
Scientific Reports, 5, 12326 (2015)
Vacuum-formed dimples in a 275 μm thick superhydrophobic PDMS micro-pillar film steered water droplets; on-chip mixing raised GFP silencing from 70.0% to 78.8%.
Scientific Reports, 5, 12306 (2015)
Oxide-free silicon reduced graphene oxide without added reductants: nanosheets raised C/O from 2.12 to about 9.32, and films on etched wafers had 3.54 KΩ/sq.
IEEE Transactions on Terahertz Science and Technology, 5 (4), 605-612 (2015)
Terahertz probing of silicon nanowires showed Auger scattering offsetting surface-trap decay; SiO2-encapsulated wires had a carrier lifetime of around 1.1 ns.
Advanced Functional Materials, 25 (21), 3114-3121 (2015)
Silver nanowires inside wet-spun SBS fibres bridged silver nanoparticle networks, keeping conduction up to 220% strain; a five-fibre glove read sign letters.
Advanced Materials, 27 (15), 2433-2439 (2015)
Kevlar fibres with Ag nanoparticles in SBS, coated with PDMS and crossed, formed a textile capacitive pressure sensor with 0.21 kPa−1 sensitivity below 2 kPa.
ACS Applied Materials & Interfaces, 7 (6), 3554-3561 (2015)
A PMMA membrane over Pd nanoparticles on single-layer graphene blocked methane, CO and NO2, while the sensor gave a 66.37% average response to 2% hydrogen.
Journal of Power Sources, 274, 1140-1146 (2015)
A self-assembled DTS organosilane coating made carbon black fuel-cell supports hydrophobic and cut CO2 released in a 1.3 V corrosion test from 291 to 177 μL.
RSC Advances, 5(8), 5754-5761 (2015)
Capacitors 2 mm above a superhydrophobic Ag/Cu groove track switched the path of rolling 5 μL water drops without contact on a 3-inlet, 4-outlet track.
Nanoscale Research Letters, 9, 610 (2014)
Adding 0.01 wt.% carbon nanotubes to a flexible polymer X-ray detector raised sensitivity from 12.5 to 38.9 μC/mGy/cm3 at 150 V; 0.005 wt.% gave a better SNR.
RSC Advances, 4(104), 60123-60130 (2014)
A 2 nm coupled APTMS-MPA monolayer raised the Cu barrier's t63.2 four-fold over APTMS, comparable to 50 nm TaN, and annealed Cu/SiO2 adhesion energy by 33%.
Advanced Materials, 26 (41), 7043-7050 (2014)
Hydrogen-switchable Pd/Si nanowires held hanging culture drops for human stem cell spheroids that secreted more VEGF than spinner-flask or petri-dish spheroids.
ACS Applied Materials & Interfaces, 6 (12), 9053-9060 (2014)
Capillary forces of water printed Ag nanoparticle line arrays from buckled templates onto flat substrates without glue; the SERS arrays detected R6G at 10⁻¹² M.
ACS Nano, 7 (12), 10809-10817 (2013)
Polymer AC electroluminescent devices with carbon nanotubes, micelles and polymer blends gave blue, green and red emission of about 2300, 6000 and 5000 cd m⁻².
Advanced Materials, 25 (30), 4139-4144 (2013)
Hydrogen-induced expansion of Pd on DTS-coated silicon nanowires switched droplets from rolling off to pinned; air restored roll-off within 3 s, over 50 cycles.
Thin Solid Films, 527, 179-185 (2013)
Cyclic rapid thermal annealing in oxygen made silicon nanowire arrays superhydrophobic yet water-adhesive (CA 154.3°); air storage restored superhydrophilicity.
Thin Solid Films, 524, 1-19 (2012)
A 2012 review of nanomaterials on flexible substrates for piezoelectric energy harvesting, chemical and pressure sensing, and bio-integrated electronics.
Small, 8 (10), 1614-1621 (2012)
Silicon nanowires aligned at micro-engraved grooves during droplet evaporation were gravure-printed onto plastic, giving FETs with 17.1 cm²/V·s hole mobility.
Journal of Nanoparticle Research, 14(5), 840 (2012)
Rapid thermal oxidation and HF etching smoothed electroless-etched p–n+ silicon nanowires, raising forward current density about 6.3-fold at 4 V.
ACS Applied Materials & Interfaces, 3 (12), 4722-4729 (2011)
UV patterning of a DTS coating on superhydrophobic Si nanowires formed erasable hydrophilic tracks that guided 8 μL droplets at 6.91 cm/s at a 5° tilt.
Journal of the Korean Physical Society, 59 (2), 501-504 (2011)
Aqueous electroless etching made Si/SiGe/Si PIN nanowire photodiodes with a reverse dark current of 9.2 × 10⁻⁶ A, against 1.0 × 10⁻² A for bulk devices.
Applied Surface Science, 257 (11), 4973-4977 (2011)
ZnO nanowires grown by MOCVD in KOH-etched Si microcavities had higher aspect ratio and density; UV detectors there gave an on/off ratio of 6 and a 5 s decay.
Thin Solid Films, 519 (2), 823-828 (2010)
Thermally pre-strained PDMS buckled 270 nm amorphous silicon films into wavy, random and herringbone wrinkles; 1D and random amplitudes matched c-Si models.
Japanese Journal of Applied Physics, 49(10R), 104003 (2010)
Larger Pt nanocrystals (15.1 to 55.2 nm) in MOS memory capacitors raised the flatband voltage shift from 5.75 to 13.05 V; the smallest retained charge best.
Applied Surface Science, 255 (8), 4616-4622 (2009)
H2 annealing at 623 K reduced Ga2O3 and ZnGa2O4 in co-sputtered ZnO:Ga films, lowering resistivity to 5.2 × 10⁻⁴ Ω cm with transmittance over 90% of glass.
No papers match these filters. Try another search or reset the filters.